shrug-l: DEM GIS contact
stuart.korte at dot.state.fl.us
stuart.korte at dot.state.fl.us
Mon Jun 12 07:44:28 EDT 2006
I believe that would be Carla Boyce, 850.413.9907
Stuart Korte
Mapping Analyst
FDOT Surveying & Mapping Office
(850) 245-1581 phone
(850) 245-1556 fax
stuart.korte at dot.state.fl.us
shrug-l-request at l
ists.dep.state.fl
.us To
Sent by: shrug-l at lists.dep.state.fl.us
shrug-l-bounces at l cc
ists.dep.state.fl
.us Subject
SHRUG-L Digest, Vol 8, Issue 8
06/09/2006 12:00
PM
Please respond to
shrug-l at lists.dep
.state.fl.us
Send SHRUG-L mailing list submissions to
shrug-l at lists.dep.state.fl.us
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.dep.state.fl.us/mailman/listinfo/shrug-l
or, via email, send a message with subject or body 'help' to
shrug-l-request at lists.dep.state.fl.us
You can reach the person managing the list at
shrug-l-owner at lists.dep.state.fl.us
When replying, please edit your Subject line so it is more specific
than "Re: Contents of SHRUG-L digest..."
Today's Topics:
1. Contact for DEM GIS (Mary Ann Vance)
2. ArcGIS Map Booklet Plotting Routine (Tripp Corbin)
3. My Mind Has Gone Blank! (Nonie Castro)
4. RE: My Mind Has Gone Blank! (Nonie Castro)
5. RE: My Mind Has Gone Blank! (Nonie Castro)
----- Message from "Mary Ann Vance" <MaryV at co.santa-rosa.fl.us> on Thu, 8
Jun 2006 15:13:09 -0500 -----
To: <shrug-l at lists.dep.state.fl.us>
Subject: shrug-l: Contact for DEM GIS
Anyone have a point of contact for the GIS Person at Division of
Emergency Mgt?
Mary Ann Vance
GIS Analyst
Santa Rosa County Planning & Zoning
6051 Old Bagdad Highway
Milton, Fl 32583
(850) 981-7081
(850) 983-9874 (Fax)
maryv at co.santa-rosa.fl.us
(See attached file: Mary Ann Vance (MaryV at co.santa-rosa.fl.us).vcf)
----- Message from "Tripp Corbin" <tcorbin at keckwood.com> on Fri, 9 Jun 2006
09:21:59 -0400 -----
To: <shrug-L at lists.dep.state.fl.us>
Subject: shrug-l: ArcGIS Map Booklet Plotting Routine
I know many of us use the DSMapbook plotting routine sample created by
ESRI. In general it works very well. But one thing that has been driving me
crazy and that is the local identifier frame. The local identifier frame
would change scale from one map to another or not center on the map that
was being printed especial for maps that were on the very edge of the grid.
I have got our programmers to fix that problem and thought other might find
it useful. So I have uploaded it to our FTP site at ftp://65.82.40.36
/ClientAccess/GIS/
Please feel free to download and use the routine. It is the same as the
ESRI sample but with the local identifier frame fixed. If you have already
installed the original ESRI DSMapbook routine just unzip the file over your
existing install and rerun the install.bat.
Tripp Corbin, MCP, GISP
Associate Vice President, GIS/Mapping
ESRI Authorized Instructor
Keck & Wood, Inc.
www.keckwood.com
(678) 417-4013
(678) 417-8785 fax
Keck & Wood, Inc offers instructor led and virtual training for ESRI's
ArcGIS & ArcView software.
Please visit www.keckwood.com for more information including a schedule of
upcoming classes.
----- Message from "Nonie Castro" <nonie_castro at coxtarget.com> on Fri, 9
Jun 2006 10:39:40 -0400 -----
To: <shrug-L at lists.dep.state.fl.us>
Subject: shrug-l: My Mind Has Gone Blank!
It has been a while since I've needed to use this, which must be why I
can't remember how.
I have labels that I need to make "stack" IF there are two (or more) words
in the label.
I am making a map of county boundaries, and I want the county names to
wrap.
So, for instance - "Billings" stays the same, "Golden Valley" becomes
Golden
Valley
Can you help?
I'm wracking my brain, I've tried the knowledge base already, I can't find
the answer.
Thanks in advance!
Thank you,
Nonie Castro
GIS Specialist
Cox Target Media
8605 Largo Lakes Blvd
Largo, FL 33773
727-399-3000 x3246
www.coxtarget.com
----- Message from "Nonie Castro" <nonie_castro at coxtarget.com> on Fri, 9
Jun 2006 11:00:19 -0400 -----
To: <shrug-L at lists.dep.state.fl.us>
Subject: RE: shrug-l: My Mind Has Gone Blank!
Thanks, but unfortunately - we don't have Maplex.
Yet.
They tell me it's coming...
I'm looking for how to write the script
"if there is a space, replace that with vbnewline"
Everytime I try, I get an error - I'm missing a piece!
From: Sykes, John [mailto:John.Sykes at dep.state.fl.us]
Sent: Friday, June 09, 2006 10:58 AM
To: Nonie Castro
Subject: RE: shrug-l: My Mind Has Gone Blank!
If you're using the Maplex label engine, it will stack the words when it
decides that it is necessary to fit into a given space and won't stack
them if it doesn't think it's necessary.
-- John
From: shrug-l-bounces at lists.dep.state.fl.us
[mailto:shrug-l-bounces at lists.dep.state.fl.us] On Behalf Of Nonie Castro
Sent: Friday, June 09, 2006 10:40 AM
To: shrug-L at lists.dep.state.fl.us
Subject: shrug-l: My Mind Has Gone Blank!
It has been a while since I've needed to use this, which must be why I
can't remember how.
I have labels that I need to make "stack" IF there are two (or more) words
in the label.
I am making a map of county boundaries, and I want the county names to
wrap.
So, for instance - "Billings" stays the same, "Golden Valley" becomes
Golden
Valley
Can you help?
I'm wracking my brain, I've tried the knowledge base already, I can't find
the answer.
Thanks in advance!
Thank you,
Nonie Castro
GIS Specialist
Cox Target Media
8605 Largo Lakes Blvd
Largo, FL 33773
727-399-3000 x3246
www.coxtarget.com
----- Message from "Nonie Castro" <nonie_castro at coxtarget.com> on Fri, 9
Jun 2006 11:23:08 -0400 -----
To: <shrug-L at lists.dep.state.fl.us>
Subject: RE: shrug-l: My Mind Has Gone Blank!
No - I've used lower case before with vbnewline.
I need to write it so it will find a space in the label name.
I use vbnewline about a million times a day when combining labels
Tampa
FL
But how do I get it to work inside a single label name???
Yargh...my head!
From: Robert_Maiden at doh.state.fl.us [mailto:Robert_Maiden at doh.state.fl.us]
Sent: Friday, June 09, 2006 11:18 AM
To: Nonie Castro
Subject: RE: shrug-l: My Mind Has Gone Blank!
shouldn't it be &vbNewLine
From: shrug-l-bounces at lists.dep.state.fl.us
[mailto:shrug-l-bounces at lists.dep.state.fl.us] On Behalf Of Nonie Castro
Sent: Friday, June 09, 2006 11:00 AM
To: shrug-L at lists.dep.state.fl.us
Subject: RE: shrug-l: My Mind Has Gone Blank!
Thanks, but unfortunately - we don't have Maplex.
Yet.
They tell me it's coming...
I'm looking for how to write the script
"if there is a space, replace that with vbnewline"
Everytime I try, I get an error - I'm missing a piece!
From: Sykes, John [mailto:John.Sykes at dep.state.fl.us]
Sent: Friday, June 09, 2006 10:58 AM
To: Nonie Castro
Subject: RE: shrug-l: My Mind Has Gone Blank!
If you're using the Maplex label engine, it will stack the words when it
decides that it is necessary to fit into a given space and won't stack
them if it doesn't think it's necessary.
-- John
From: shrug-l-bounces at lists.dep.state.fl.us
[mailto:shrug-l-bounces at lists.dep.state.fl.us] On Behalf Of Nonie Castro
Sent: Friday, June 09, 2006 10:40 AM
To: shrug-L at lists.dep.state.fl.us
Subject: shrug-l: My Mind Has Gone Blank!
It has been a while since I've needed to use this, which must be why I
can't remember how.
I have labels that I need to make "stack" IF there are two (or more) words
in the label.
I am making a map of county boundaries, and I want the county names to
wrap.
So, for instance - "Billings" stays the same, "Golden Valley" becomes
Golden
Valley
Can you help?
I'm wracking my brain, I've tried the knowledge base already, I can't find
the answer.
Thanks in advance!
Thank you,
Nonie Castro
GIS Specialist
Cox Target Media
8605 Largo Lakes Blvd
Largo, FL 33773
727-399-3000 x3246
www.coxtarget.com
Spam
Not spam
Forget previous vote_______________________________________________
SHRUG-L mailing list
SHRUG-L at lists.dep.state.fl.us
http://lists.dep.state.fl.us/mailman/listinfo/shrug-l
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mary Ann Vance (MaryV at co.santa-rosa.fl.us).vcf
Type: application/octet-stream
Size: 186 bytes
Desc: not available
Url : http://lists.dep.state.fl.us/pipermail/shrug-l/attachments/20060612/c1bfe597/MaryAnnVanceMaryVco.santa-rosa.fl.us.obj
More information about the SHRUG-L
mailing list