gis-l: RE: GIS-L Digest, Vol 59, Issue 6

Ali, Eesa Eesa.Ali at dep.state.fl.us
Tue Sep 21 11:00:53 EDT 2010


Thank you all for your help,
e
-----Original Message-----
From: gis-l-bounces at lists.dep.state.fl.us [mailto:gis-l-bounces at lists.dep.state.fl.us] On Behalf Of gis-l-request at lists.dep.state.fl.us
Sent: Tuesday, September 21, 2010 10:47 AM
To: gis-l at lists.dep.state.fl.us
Subject: GIS-L Digest, Vol 59, Issue 6

Send GIS-L mailing list submissions to
	gis-l at lists.dep.state.fl.us

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.dep.state.fl.us/mailman/listinfo/gis-l
or, via email, send a message with subject or body 'help' to
	gis-l-request at lists.dep.state.fl.us

You can reach the person managing the list at
	gis-l-owner at lists.dep.state.fl.us

When replying, please edit your Subject line so it is more specific
than "Re: Contents of GIS-L digest..."


Today's Topics:

   1. Creating a layer from a selection (Ali, Eesa)
   2. RE: Creating a layer from a selection (Nash, Anita)
   3. RE: Creating a layer from a selection (Bokey, Aparna)


----------------------------------------------------------------------

Message: 1
Date: Tue, 21 Sep 2010 09:51:12 -0400
From: "Ali, Eesa" <Eesa.Ali at dep.state.fl.us>
Subject: gis-l: Creating a layer from a selection
To: "gis-l at lists.dep.state.fl.us" <gis-l at lists.dep.state.fl.us>
Message-ID:
	<B0B84D3FB4C07C4A980FB2836BA1913C181D586B at ECHMBA.floridadep.net>
Content-Type: text/plain; charset="us-ascii"

I'm using ArcMap 9.3.1 w/ the new dataminer.
When I create a layer from a selection it projects the selection but then it disappears after zooming; and it doesn't reappear when I zoom to the full extent or refresh.
I got it to work once today but then I tried to create another selection from the new layer but the attribute table was empty- so no projection. Anyone run into this problem?

Eesa Gafoor-Ali
Environmental Specialist
Surface Water Assessment Monitoring Program
Florida Department of Environmental Protection
7825 Baymeadows Way, Suite 200B
Jacksonville, FL 32256
904-807-3230 office
904-813-1298 mobile



The Department of Environmental Protection values your feedback as a customer. DEP Secretary Mimi Drew is committed to continuously assessing and improving the level and quality of services provided to you. Please take a few minutes to comment on the quality of service you received. Simply click on this link to the DEP Customer Survey<http://survey.dep.state.fl.us/?refemail=Eesa.Ali@dep.state.fl.us>. Thank you in advance for completing the survey.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dep.state.fl.us/pipermail/gis-l/attachments/20100921/5b30cca3/attachment-0001.htm

------------------------------

Message: 2
Date: Tue, 21 Sep 2010 09:58:26 -0400
From: "Nash, Anita" <Anita.Nash at dep.state.fl.us>
Subject: gis-l: RE: Creating a layer from a selection
To: "Ali, Eesa" <Eesa.Ali at dep.state.fl.us>,
	"gis-l at lists.dep.state.fl.us"	<gis-l at lists.dep.state.fl.us>
Message-ID:
	<66C16EFF3D418E4FAF3751E810807EAA44337039A1 at ECHMBB.floridadep.net>
Content-Type: text/plain; charset="us-ascii"

I too ran into this a few months ago. I didn't find a fix.  Try editing, not create layer.

Anita Nash
Florida Department of Environmental Protection
Office:  (850) 245-8545, Fax: (850) 245-8434

From: gis-l-bounces at lists.dep.state.fl.us [mailto:gis-l-bounces at lists.dep.state.fl.us] On Behalf Of Ali, Eesa
Sent: Tuesday, September 21, 2010 9:51 AM
To: gis-l at lists.dep.state.fl.us
Subject: gis-l: Creating a layer from a selection

I'm using ArcMap 9.3.1 w/ the new dataminer.
When I create a layer from a selection it projects the selection but then it disappears after zooming; and it doesn't reappear when I zoom to the full extent or refresh.
I got it to work once today but then I tried to create another selection from the new layer but the attribute table was empty- so no projection. Anyone run into this problem?

Eesa Gafoor-Ali
Environmental Specialist
Surface Water Assessment Monitoring Program
Florida Department of Environmental Protection
7825 Baymeadows Way, Suite 200B
Jacksonville, FL 32256
904-807-3230 office
904-813-1298 mobile


The Department of Environmental Protection values your feedback as a customer. DEP Secretary Mimi Drew is committed to continuously assessing and improving the level and quality of services provided to you. Please take a few minutes to comment on the quality of service you received. Simply click on this link to the DEP Customer Survey<http://survey.dep.state.fl.us/?refemail=Eesa.Ali@dep.state.fl.us>. Thank you in advance for completing the survey.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dep.state.fl.us/pipermail/gis-l/attachments/20100921/9598c441/attachment-0001.htm

------------------------------

Message: 3
Date: Tue, 21 Sep 2010 10:46:45 -0400
From: "Bokey, Aparna" <Aparna.Bokey at dep.state.fl.us>
Subject: gis-l: RE: Creating a layer from a selection
To: "gis-l at lists.dep.state.fl.us" <gis-l at lists.dep.state.fl.us>
Message-ID:
	<195029C8E81ABA42954AA5FD6D080AE444333F86AF at ECHMBB.floridadep.net>
Content-Type: text/plain; charset="us-ascii"

This is most probably a bug in ArcMap 9.3.1. A better workaround would be to select the features as before but instead of using the "Create Layer from Selected Features" option try exporting the selected features in a new shapefile.
After testing this on many layers from different sources we feel that this bug is not related to the new DataMiner v5 nor does it seem to be projection related.
Hope this helps.

Regards,
Aparna Bokey
_____________________________________________________
Florida Department of Environmental Protection (FDEP)
OTIS/GIS Section
2600 Blair Stone Rd, MS 6520
Tallahassee, FL 32399-2400
(850) 245-8282
aparna.bokey at dep.state.fl.us
http://www.dep.state.fl.us/mainpage/programs/gis.htm


From: gis-l-bounces at lists.dep.state.fl.us [mailto:gis-l-bounces at lists.dep.state.fl.us] On Behalf Of Ali, Eesa
Sent: Tuesday, September 21, 2010 9:51 AM
To: gis-l at lists.dep.state.fl.us
Subject: gis-l: Creating a layer from a selection

I'm using ArcMap 9.3.1 w/ the new dataminer.
When I create a layer from a selection it projects the selection but then it disappears after zooming; and it doesn't reappear when I zoom to the full extent or refresh.
I got it to work once today but then I tried to create another selection from the new layer but the attribute table was empty- so no projection. Anyone run into this problem?

Eesa Gafoor-Ali
Environmental Specialist
Surface Water Assessment Monitoring Program
Florida Department of Environmental Protection
7825 Baymeadows Way, Suite 200B
Jacksonville, FL 32256
904-807-3230 office
904-813-1298 mobile


The Department of Environmental Protection values your feedback as a customer. DEP Secretary Mimi Drew is committed to continuously assessing and improving the level and quality of services provided to you. Please take a few minutes to comment on the quality of service you received. Simply click on this link to the DEP Customer Survey<http://survey.dep.state.fl.us/?refemail=Eesa.Ali@dep.state.fl.us>. Thank you in advance for completing the survey.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dep.state.fl.us/pipermail/gis-l/attachments/20100921/f455d083/attachment.htm

------------------------------

_______________________________________________
GIS-L mailing list
GIS-L at lists.dep.state.fl.us
http://lists.dep.state.fl.us/mailman/listinfo/gis-l


End of GIS-L Digest, Vol 59, Issue 6
************************************


More information about the GIS-L mailing list