shrug-l: Conversion of State Plane point data to Lat/Long

[Preston Yates]

If you are using 9.2, you can change the projection of your data frame
to WGS84 then use the calculate geometry function, which has the option
to calculate x/y based on the feature projection or the data frame
projection.  Using the data frame projection will give you lat/lon in
decimal degrees.
 

Thank you -

Preston Yates
GIS Coordinator
Flagler County Emergency Management
1769 East Moody Blvd. #3
Bunnell, FL 32110
Ph: (386) 313-4251
Fax: (386) 313-4299
pyates at flaglercounty.org


 

________________________________

From: shrug-l-bounces at lists.dep.state.fl.us
[mailto:shrug-l-bounces at lists.dep.state.fl.us] On Behalf Of Cornell,
Jason
Sent: Tuesday, February 26, 2008 3:38 PM
To: shrug-l at lists.dep.state.fl.us
Subject: shrug-l: Conversion of State Plane point data to Lat/Long



I am trying to add lat/long data to an existing .mdb.  I have
successfully created x and y coordinate fields and populated the fields
based on the respective State Plane system (Florida North).  I now need
to convert the SP coordinates to lat/long.  Is this possible?

 

Any information would be a great help!

 

Thanks,

 

 

Jason Cornell

Environmental Specialist

Planning and Environmental Management Office

FDOT - District Two

1109 S. Marion Ave

Lake City, FL  32025

Ph:  386-961-7524

Fax:386-961-7508

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dep.state.fl.us/pipermail/shrug-l/attachments/20080226/20fb74a9/attachment.html