shrug-l: Geodatabase to CAD

[Thomas, Jim]

Hi All,

Is there a common practice or recommended process of transforming data from an ESRI geodatabase to a DXF or DWG while still retaining most of the attributes?  I have a large geodatabase that might need to be converted so another department can use it in CAD.  If any of you have been successful in this, I would also be interested in suggested tools that might allow some interoperability between the two.  Any suggestion would be appreciated.  Thanks.

________________________________
Jim Thomas, GISP | GIS Analyst | Golder Associates Inc.
9428 Baymeadows Road, Suite 400, Jacksonville, Florida, USA 32256
T: +1 (904) 363-3430 | D: +1 904 363 3430 | F: +1 (904) 363-3445 | C: +1 | E: jim_thomas at golder.com<mailto:jim_thomas at golder.com> | www.golder.com<http://www.golder.com/>

Work Safe, Home Safe

This email transmission is confidential and may contain proprietary information for the exclusive use of the intended recipient. Any use, distribution or copying of this transmission, other than by the intended recipient, is strictly prohibited. If you are not the intended recipient, please notify the sender and delete all copies. Electronic media is susceptible to unauthorized modification, deterioration, and incompatibility. Accordingly, the electronic media version of any work product may not be relied upon.

Please consider the environment before printing this email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dep.state.fl.us/pipermail/shrug-l/attachments/20090424/ebf50d91/attachment.html